 |
| Quantity: | |
|---|---|
DTN Press Style Spot/Projection Welder
The DTN press style spot/projection welder is specially designed with horizontally mounted cylinders, which optimize the performance of spot welding or projection welding on T-shaped workpieces.
Features
1. Digital setting and display of all operating parameters like weld voltage, power setting, etc.
2. In-memory data storage to prevent accidental data loss.
3. Voltage fluctuation monitoring to prevent it from damaging your data.
4. High secondary volts ensure a short weld time to fit different welding requirements of special materials.
5. Adjustable stroke air cylinder and speed control valves to control up and down ram movement.
6. 40 sets of welding parameters are under microprocessor precision control.
7. Error management is adopted for general warnings and major faults through clear messages.
Parameter
Model | DN-80 | DN-100 | DN-160 | DN-200 | DN-250 | DN-315 | DN-400 | |
Item | Unit | |||||||
Rated voltage | V | 380 | ||||||
Rated frequency | HZ | 50/60 | ||||||
Rated capacity | KVA | 80 | 100 | 160 | 200 | 250 | 315 | 400 |
Rated duty cycle | % | 30 | ||||||
Insulation class | B | |||||||
Maximum secondary short circuit current | A | 30000 | 25000 | 41000 | 46000 | 53000 | 58000 | 64000 |
Maximum welding power | KVA | 80 | 100 | 160 | 200 | 250 | 315 | 400 |
Maximum pressure | N | 10000 | 10000 | 15600 | 15600 | 20000 | 20000 | 20000 |
Stroke | mm | 70 | ||||||
Input air pressure | Mpa | 0.5 | ||||||
Cooling water flow | L/min | 7 | 7 | 7 | 10 | 10 | 10 | 10 |
Arm extension length | mm | 420-500 | ||||||
DTN Press Style Spot/Projection Welder
The DTN press style spot/projection welder is specially designed with horizontally mounted cylinders, which optimize the performance of spot welding or projection welding on T-shaped workpieces.
Features
1. Digital setting and display of all operating parameters like weld voltage, power setting, etc.
2. In-memory data storage to prevent accidental data loss.
3. Voltage fluctuation monitoring to prevent it from damaging your data.
4. High secondary volts ensure a short weld time to fit different welding requirements of special materials.
5. Adjustable stroke air cylinder and speed control valves to control up and down ram movement.
6. 40 sets of welding parameters are under microprocessor precision control.
7. Error management is adopted for general warnings and major faults through clear messages.
Parameter
Model | DN-80 | DN-100 | DN-160 | DN-200 | DN-250 | DN-315 | DN-400 | |
Item | Unit | |||||||
Rated voltage | V | 380 | ||||||
Rated frequency | HZ | 50/60 | ||||||
Rated capacity | KVA | 80 | 100 | 160 | 200 | 250 | 315 | 400 |
Rated duty cycle | % | 30 | ||||||
Insulation class | B | |||||||
Maximum secondary short circuit current | A | 30000 | 25000 | 41000 | 46000 | 53000 | 58000 | 64000 |
Maximum welding power | KVA | 80 | 100 | 160 | 200 | 250 | 315 | 400 |
Maximum pressure | N | 10000 | 10000 | 15600 | 15600 | 20000 | 20000 | 20000 |
Stroke | mm | 70 | ||||||
Input air pressure | Mpa | 0.5 | ||||||
Cooling water flow | L/min | 7 | 7 | 7 | 10 | 10 | 10 | 10 |
Arm extension length | mm | 420-500 | ||||||
