 |
| Quantity: | |
|---|---|
Automatic Seam Welder, Direct Current (DC) Inverter Type
The automatic seam welder (direct current (DC) inverter type) carries out automatic welding, making it suitable for large-scale production operations for manufacturing things like solar water heaters, sink fuel tanks, pipelines, gas tanks, machine enclosures, and so on.
Features
1. Two welding drive rolls with silver bearing helps to achieve consistent electrical conductivity and reduced friction to increase its production efficiency.
2. Corrections on bevel gears ensure the good leak tightness of welding parts. Breakdown or puncture of welding components can be prevented and wear-resistant welding wheel can maintain high-speed welding.
3. A resistance welding control system can help you adjust current frequency, pulse duration, current magnitude.
4. The T1 pure copper welding transformer has minimized no-load loss, strong output power, good insulating property for long service life.
5. High Si content electrical steel sheet, resin vacuum casting, water-cooled secondary connection cable
6. A two-way temperature regulating valve serves as an integral overload relief valve to prevent against transformer damage because of high temperature.
Parameter
Model | FN-100 | FN-125 | FN-160 | FN-200 | FN-250 | |
Item | Unit | |||||
Rated voltage | V | 380 | ||||
Rated frequency | HZ | 50/60 | ||||
Rated capacity | KVA | 100 | 125 | 160 | 200 | 250 |
Rated duty cycle | % | 20 | ||||
Insulation class | B | |||||
Maximum secondary short circuit current | A | 18000 | 19500 | 22000 | 27500 | 29800 |
Maximum welding power | KVA | 120 | 150 | 200 | 250 | 300 |
Maximum pressure | N | 6100 | 6100 | 10000 | 10000 | 12000 |
Maximum welding ability | low-carbon steel mm | 1.0+1.0 | 1.2+1.2 | 1.5+1.5 | 2+2 | 2.5+2.5 |
Input air pressure | Mpa | 0.5 | ||||
Cooling water flow | L/min | 20 | 20 | 20 | 20 | 20 |
Control mode | numerical control | |||||
Stroke | MM | 0-80 | ||||
Welding speed | M/min | 0.6-3.0 | ||||
Automatic Seam Welder, Direct Current (DC) Inverter Type
The automatic seam welder (direct current (DC) inverter type) carries out automatic welding, making it suitable for large-scale production operations for manufacturing things like solar water heaters, sink fuel tanks, pipelines, gas tanks, machine enclosures, and so on.
Features
1. Two welding drive rolls with silver bearing helps to achieve consistent electrical conductivity and reduced friction to increase its production efficiency.
2. Corrections on bevel gears ensure the good leak tightness of welding parts. Breakdown or puncture of welding components can be prevented and wear-resistant welding wheel can maintain high-speed welding.
3. A resistance welding control system can help you adjust current frequency, pulse duration, current magnitude.
4. The T1 pure copper welding transformer has minimized no-load loss, strong output power, good insulating property for long service life.
5. High Si content electrical steel sheet, resin vacuum casting, water-cooled secondary connection cable
6. A two-way temperature regulating valve serves as an integral overload relief valve to prevent against transformer damage because of high temperature.
Parameter
Model | FN-100 | FN-125 | FN-160 | FN-200 | FN-250 | |
Item | Unit | |||||
Rated voltage | V | 380 | ||||
Rated frequency | HZ | 50/60 | ||||
Rated capacity | KVA | 100 | 125 | 160 | 200 | 250 |
Rated duty cycle | % | 20 | ||||
Insulation class | B | |||||
Maximum secondary short circuit current | A | 18000 | 19500 | 22000 | 27500 | 29800 |
Maximum welding power | KVA | 120 | 150 | 200 | 250 | 300 |
Maximum pressure | N | 6100 | 6100 | 10000 | 10000 | 12000 |
Maximum welding ability | low-carbon steel mm | 1.0+1.0 | 1.2+1.2 | 1.5+1.5 | 2+2 | 2.5+2.5 |
Input air pressure | Mpa | 0.5 | ||||
Cooling water flow | L/min | 20 | 20 | 20 | 20 | 20 |
Control mode | numerical control | |||||
Stroke | MM | 0-80 | ||||
Welding speed | M/min | 0.6-3.0 | ||||
